重庆国际复合材料股份有限公司-短切纱

水拉丝 Wet chopped strands (WCS) BMC BMC 热塑性短切纱 Thermoplastic chopped strand

水拉丝 Wet chopped strands (WCS)

本产品为湿法短切水分散纤维系列产品。WCS2505系列产品是主要针对增强工业脱硝催化剂载体设计的玻璃短切纤维。纤维经特殊浸润剂处理后，具备良好的分散性能和增强性能。 These are a series of wet-chopped water-dispersible fibers. The WCS2505 series fibers are glass chopped fibers specifically designed for reinforcing industrial denitration catalyst carriers. After treatment with a special sizing agent, the fibers exhibit excellent dispersing and reinforcing properties.

产品目录 Product Catalog

产品类型	浸润剂类型	纤维直径(μm)	短切长度(mm)	操作
WCS2505-065-600	2505	6.5	6
WCS8559-110-600/1200	8559	11	6/12
WCS8559-130-1200	8559	13	12
WCS8132-075-150/300	8132	7.5	1.5/3
WCS9687-060-600	9687	6	6	下载
WCS9687-065-300/600/900	9687	6.5	3/6/9	下载
WCS9687-070-600	9687	7	6
WCS9687-075-600	9687	7.5	6
WCS9687-100-600	9687	10	6
WCS9687-110-600/1200	9687	11	6/12
WCS9687-130-1200/1800/2400	9687	13	12/18/24
WCS9687B-065-600	9687B	6.5	6
WCS9687B-070-600	9687B	7	6
WCS9687B-075-300/600	9687B	7.5	3/6
WCS9687H-070-600	9687H	7	6

Product Code	Sizing	Filament Diameter(μm)	Chopped Length (mm)	Data sheet
WCS2505-065-600	2505	6.5	6
WCS8559-110-600/1200	8559	11	6/12
WCS8559-130-1200	8559	13	12
WCS8132-075-150/300	8132	7.5	1.5/3
WCS9687-060-600	9687	6	6	Download
WCS9687-065-300/600/900	9687	6.5	3/6/9	Download
WCS9687-070-600	9687	7	6
WCS9687-075-600	9687	7.5	6
WCS9687-100-600	9687	10	6
WCS9687-110-600/1200	9687	11	6/12
WCS9687-130-1200/1800/2400	9687	13	12/18/24
WCS9687B-065-600	9687B	6.5	6
WCS9687B-070-600	9687B	7	6
WCS9687B-075-300/600	9687B	7.5	3/6
WCS9687H-070-600	9687H	7	6

BMC BMC

本产品是专门为BMC工艺开发。适用于汽车烟缸、雨刮器电机等要求阻燃的制品。 This product has been specially developed for the BMC process and is well-suited for flame retardant products such as ashtrays and wiper motors for automobiles.

产品目录 Product Catalog

牌号	单丝直径 (μm)	短切长度(mm)	适用树脂	适用工艺	下游用途	性能特点	操作
402A	10	1.7/3	酚醛树脂	BMC	用于汽车的烟缸、雨刮器电机等要求阻燃的制品。	颗粒均匀、流动性好，与酚醛树脂有良好的浸润性、反应性，增强效果好，	下载
402B	10	1.7/3	酚醛树脂	BMC	用于汽车的烟缸、雨刮器电机等要求阻燃的制品。	适用于湿法工艺，具有更高强度	下载
402S	10	3	酚醛树脂	BMC	刹车片等	丝束均匀，分散性好，适合干法工艺，	下载
403	13	6/12	不饱和聚酯、乙烯基	BMC	广泛用于天花板、电器开关、灯罩等	纤维的颜色好、流动性好，浸润性好、易着色，增强制品的抗冲性好好、颜色好，	下载
403W	13.7	3	不饱和聚酯、乙烯基	BMC	天花板、电器开关、灯罩等	低油含量，好的捏合性，更好的制品色泽，适合多种树脂，良好的增强效果	下载
404	13	6/12	不饱和聚酯、乙烯基	BMC	电气部件、建筑管线接头等。	通用产品，颜色好，	下载
404W	13.7	6/12/24/48	不饱和聚酯、乙烯基	BMC	电气部件、建筑管线接头等	通用的标准型湿切BMC短切纱，烘干无黄纱	下载
407	13	3/6/12/24/48	不饱和聚酯、乙烯基	BMC	主要用于民用电气开关、汽车零部件、卫生洁具等	流动性好、毛纱少，捏合过程中浸润性好、着色快、分散性好，增强制品的综合力学性能好，	下载
407N	13.7	3/6/12/24/48	不饱和聚酯、乙烯基	BMC	主要用于民用电气开关、汽车零部件、卫生洁具等		下载

Product Code	Filament Diameter(μm)	Chopped Length (mm)	Resin Compatibility	Compostie Manufacturing Process	Application	Product Features	Data sheet
402A	10	1.7/3	Phenolic Resin	BMC	Car ashtray,wiper motor and other requirements on fire resistance	Pellet even、Good flow ablity、Compatible and reactivity well with basic resin、Excellent mechanical properties	Download
402B	10	1.7/3	Phenolic Resin	BMC	Car ashtray,wiper motor and other requirements on fire resistance	Suitable for Wet processing, with higher strength	Download
402S	10	3	Phenolic Resin	BMC	Break system	Even strand、well dispersion、Excellent mechanical properties、Suitable for Dry processing	Download
403	13	6/12	Unsaturated polyester、Ethenyl Resin	BMC	Ceiling、Electric switch、Lampshade	Good flowability、Good wetting、Easy coloring、Good impact resistance of reinforced product	Download
403W	13.7	3	Unsaturated polyester、Ethenyl Resin	BMC	Ceiling、Electric switch、Lampshade	Low oil content Good dispersion Good GFRP Coloring Good GFRP property compatible for types of resin	Download
404	13	6/12	Unsaturated polyester、Ethenyl Resin	BMC	Electric Components、Construction pipeline joint	Good Flowability、Excellent GFRP property、Good resin compatility	Download
404W	13	6/12	Unsaturated polyester、Ethenyl Resin	BMC	Electric Components、Construction pipeline joint	universal product of BMC、Drying without yellow yarn	Download
407	13.7	3/6/12/24/48	Unsaturated polyester、Ethenyl Resin	BMC	Electric switch、Car parts、Sanitary ware	Good flowability、Low Fuzz、Fast wet-out and coloring、well dispersion、Excellent comprehensive mechanical properties of GFRP	Download
407N	13.7	3/6/12/24/48	Unsaturated polyester、Ethenyl Resin	BMC	Electric switch、Car parts、Sanitary ware	Good flowability、Low Fuzz、Fast wet-out and coloring、well dispersion、Higher mechanical property and impact resistance	Download

热塑性短切纱 Thermoplastic chopped strand

CPIC生产的增强热塑型短切纱规格齐全，能够为通用的工程塑料提供增强方案。 CPIC produces various reinforced thermoplastic chopped strands with complete specifications. These versatile products are designed to reinforce general engineering plastics.

产品目录 Product Catalog

产品代号	单丝直径 (μm)	短切长度 (mm)	适用树脂	产品特性	操作
301CL	7	1.7,3,4.5	PA	低翘曲，高性能用特殊产品(PA6,PA66)	下载
301CL	10	1.7,3，4.5	PA	普通用途的标准产品(PA6,PA66)
301HP	7	3，4.5	PA	适用于低翘曲、耐高温、耐冷冻液高性能产品,用于PA6,PA66,PA12,PA612,PA6T,9T和HTN,优异的耐冷冻液性能，优异的耐高温性能，低的烟气发生量；弹性体改性的各种尼龙；尼龙合金，如PA/PE,PA/PP,PA/ABS;不含NPE	下载
	10	3，4.5	PA	常规ECT玻璃,用于PA6,PA66,PA12,PA612,PA6T,9T和HTN,优异的耐冷冻液性能，优异的耐高温性能，低的烟气发生量；弹性体改性的各种尼龙；尼龙合金，如PA/PE,PA/PP,PA/ABS;不含NPE	下载
	11	3，4.5	PA	高性能TM玻璃,用于PA6,PA66,PA12,PA612,PA6T,9T和HTN,优异的耐冷冻液性能，优异的耐高温性能，低的烟气发生量；弹性体改性的各种尼龙；尼龙合金，如PA/PE,PA/PP,PA/ABS;不含NPE
	13	3，4.5	PA	低介电HL玻璃,用于PA6,PA66,PA12,PA612,PA6T,9T和HTN,优异的耐冷冻液性能，优异的耐高温性能，低的烟气发生量；弹性体改性的各种尼龙；尼龙合金，如PA/PE,PA/PP,PA/ABS;不含NPE
3014B	10	1.7，3，4.5	PA	用于低黏度PA6和PA66，也可用于弹性体改性的PA6和PA66,不含NPE	下载
301X1	10	3，4.5	PA	优异的耐冷冻液性能，用于PA6,PA66	下载
301T	15.7	3	PA	1:3扁平纤维，适用于高填充低翘曲产品	下载
301HF	15.7	3	PA	1:4扁平纤维，高流动性，适用于高填充、低翘曲，防翘曲效果好	下载
303A	7	3	PET,PBT,PC，PC/ABS	低翘曲，高光用特殊产品，优异的力学性能，高HDT,	下载
303A	10，13	3，4.5	PET,PBT,PC，PC/ABS	标准产品，高力学性能	下载
303H	10	3	PET,PBT,PC，PC/ABS	标准产品，高力学性能	下载
3031H	10	3	PET,PBT,PC，PC/ABS	标准产品，力学性能好，制品颜色白,不含NPE	下载
303N	13	3	PET,PBT,PC，PC/ABS	ECT玻璃,性能颜色优异，毛纱少，流动性好	下载
303W	10	3	PET,PBT,PC，PC/ABS	制品有特别好的颜色，不含NPE	下载
303T	15.7	3	PET,PBT,PC，PC/ABS	1：3扁平纤维，使用于高填充低翘曲产品	下载
303HK	13	3	PET,PBT,PC，PC/ABS	耐热水性能优异	下载
304A	13	3	AS,ABS	标准产品，不含NPE	下载
305K	13	3，4.5	PE,PP	标准产品，制品颜色白，，不含NPE	下载
305K	10	3，4.5	PE,PP
305B	13	3，4.5	PE,PP	高力学性能，制品颜色白，不含NPE	下载
306	13	3	MPPO (PPE)	标准产品，，不含NPE	下载
306HR	10	3	MPPO (PPE)	特殊产品，用于PPO/PA合金	下载
306HR	13	3	MPPO (PPE)	高力学性能，优异的耐热水性能	下载
307	13	3	PC	标准产品，高力学性能，适合于玻纤含量大于15％的应用	下载
307NB	13	3	PC	高冲击强度，适合于玻纤含量小于15％的应用	下载
307AT	15.7	3，4.5	PC	1:4扁平纤维，高流动性，耐翘曲	下载
308	10	3,4.5	POM	标准产品	下载
309A	7,10	3	PPS	标准产品，耐水性好，低的烟气发生量，不含NPE	下载
309C	10	3	PPS	高力学性能，耐水性好，适用于非结晶PPA，不含NPE	下载
3098C	10	3	LCP	高力学性能，高HDT，高耐热，低的烟气发生量，不含NPE	下载
3098HF	15.7	3，4.5	LCP	1：4扁平纤维，高流动性产品，耐翘曲效果好	下载

Product Code	Filament Diameter(μm)	Resin Compatibility	Product Features & Application	Data sheet
301CL	7	PA	High performance special product(PA6,PA66), specially for low warp and high gloss	Download
301CL	301CL	10	PA	Standard Product(PA6,PA66)	Download
301HP	7	PA	Suitable for low warp、high temperature resistance, Resistance to freezing liquid .Suitable for PA6,PA66,PA12,PA612,PA6T,9T and HTN. Super glycol and super high temperature resistance	Download
	301HP	10	PA	ECT glass,Suitable for PA6,PA66,PA12,PA612,PA6T,9T and HTN. Super glycol and super high temperature resistance	Download
	301HP	11	PA	TM+ glass,Suitable for PA6,PA66,PA12,PA612,PA6T,9T and HTN. Super glycol and super high temperature resistance	Download
	301HP	13	PA	HL glass,Suitable for PA6,PA66,PA12,PA612,PA6T,9T and HTN. Super glycol and super high temperature resistance	Download
3014B	10	PA	Used for low viscosity PA6 and PA66，Can be used in the elastomer modified PA6 and PA66,NPE free	Download
301X1	10	PA	excellent Resistance to freezing liquid for PA6,PA66	Download
301T	15.7	PA	1：3 flat ratio，highly filled and specially for low warp	Download
301HF	15.7	PA	1：4 flat ratio，high flow ，highly filled and specially for low warp. Prevent warping effect is best	Download
303A	7	PET,PBT,PC，PC/ABS	low warp，Special Product for best bright finish，High mechanical properties , high HDT	Download
303A	303A	13	PET,PBT,PC，PC/ABS	Standard Product，High mechanical properties	Download
303H	10	PET,PBT,PC，PC/ABS	Standard Product，High mechanical properties	Download
3031H	10	PET,PBT,PC，PC/ABS	Standard Product，High mechanical properties，excellent white color, NPE free	Download
303N	13	PET,PBT,PC，PC/ABS	ECT glass/HL glass,High mechanical properties, excellent color，low fuzz，high flow	Download
303W	10	PET,PBT,PC，PC/ABS	excellent color， NPE free	Download
303T	15.7	PET,PBT,PC，PC/ABS	1：3 flat ratio，high flow ，highly filled and specially for low warp	Download
303HK	13	PET,PBT,PC，PC/ABS	excellent hot water resistance	Download
304A	13	AS,ABS	Standard Product，NPE free	Download
305K	13	PE,PP	Standard Product. super detergent resistance and excellent white color	Download
305K	305K	10	PE,PP	Standard Product. super detergent resistance and excellent white color	Download
305B	13	PE,PP	High mechanical properties, excellent white color, NPE free	Download
306	13	MPPO (PPE)	Standard Product，NPE free	Download
306HR	10	MPPO (PPE)	Special product for PPO/PA blend	Download
306HR	306HR	13	MPPO (PPE)	High mechanical properties and excellent hot water resistance	Download
307	13	PC	Standard Product, high mechanical properties, glass fiber content more than 15%	Download
307NB	13	PC	High impact strength, glass content less than15%	Download
307AT	15.7	PC	1：4 flat ratio，high flow ，specially for low warp	Download
308	10	POM	标准产品	Download
309A	7,10	PPS	Standard Product, excellent hot water resistance and extremely low out gassing，NPE free	Download
309C	10	PPS	high mechanical properties，excellent hot water resistance，Apply to non-crystalline PPA，NPE free	Download
3098C	10	LCP	high mechanical properties，high HDT，heat-resisting, extremely low out gassing	Download
3098HF	15.7	LCP	1：4 flat ratio，high flow ，specially for low warp	Download

致力于研制品质稳定
持续创新的高性能产品

WE ARE COMMITTED TO DEVELOPING HIGH-PERFORMANCE PRODUCTS
WITH STABLE QUALITY AND CONTINUOUS INNOVATION

短切纱 Chopped Strands

短切纱 Chopped Strands

水拉丝 Wet chopped strands (WCS)

产品目录 Product Catalog

BMC BMC

产品目录 Product Catalog

热塑性短切纱 Thermoplastic chopped strand

产品目录 Product Catalog